Skip to content

How to Remove Mould from Curtains with Thermal Backing in Easy 7 Steps?

how to remove mould from curtains with thermal backing

A curtain’s thermal lining is an additional layer added during manufacturing. Curtains with thermal backing keep your home warm in winter and cool in summer. But they can also be a magnet for mould and mildew. Ignoring the problem may end up costing more.

Thermal insulated curtains are often used to help reduce energy loss in a home. By keeping the heat in, it can help to save on energy costs. The curtains are made of a specific insulated fabric that helps keep the heat in and block out light.

But how to remove mould from curtains with thermal backing that have become stained and smelly? That’s what we’re here for.

We will discuss the steps needed to clean thermal back curtains and prevent mildew and mould growth in the future. So let’s get started.

Steps on How to Remove Mould from Curtains with Thermal Backing

Steps on How to Remove Mould from Curtains with Thermal Backing

Curtains are often one of the first places that mould and mildew will start to form. This is because they are constantly exposed to moisture and humidity. The key to preventing mould and mildew is to keep your curtains dry.

If your curtains have already started to develop mould or mildew, you’ll need to take action immediately. Here are the steps you need to follow:

Step 01: Remove the Curtains

The first step is to remove the curtains from the window. Be sure to do this carefully so as not to rip or tear them.

Step 02: Vacuum the Curtains

Next, you’ll need to vacuum the curtains. This will help to remove any dirt or dust that may be on the fabric. To do this, simply set your vacuum to the delicate setting and run it over the curtains.

Step 03: Pre-treat the Curtains

Once you’ve vacuumed the curtains, you’ll need to pre-treat them. This will help to remove any stains that may be on the fabric.

The curtains mix in a mild detergent or bleach and cold water to pre-treat. Then, use a clean cloth to apply the mixture to the stained areas of the curtains. Allow the mixture to sit on the fabric for a few minutes before rinsing it off with clean water.

Step 04: Wash the Curtains

Wash the Curtains

After you’ve pre-treated the curtains, you’ll need to wash them. Simply add the curtains to your washing machine and set it to the delicate cycle. Or, if your washing machine doesn’t have a delicate cycle, you can hand wash the curtains in a tub of cold water.

Step 05: Dry the Curtains

The next step is to dry the curtains. You can either hang them up to dry or put them in the dryer on the low heat setting. Be sure to remove the curtains from the dryer while they are still damp.

Step 06: Inspect the Curtains

Once the curtains are dry, you’ll need to inspect them for any remaining mould or mildew. Simply repeat steps 3-5 until the mould and mildew are gone if you see any.

Step 07: Iron the Curtains

The final step is to iron the curtains. This will help remove any wrinkles or creases that may have formed while drying.

Now that you know how to remove mould from thermal curtains, you can be sure that your home stays mould and mildew free. Simply follow these steps on a regular basis, and your curtains will stay looking and smell fresh for years to come.

Tips on How to Prevent Mould and Mildew

Tips on How to Prevent Mould and Mildew

In addition to knowing what to do with thermal-backed curtains that have mold, it’s also important to know how to prevent it. Here are a few tips to keep in mind:

i) Always keep your curtains clean. Be sure to vacuum or brush them on a regular basis.

ii) When you’re not using your curtains, be sure to store them in a dry place.

iii) If your home is prone to high levels of humidity, be sure to use a dehumidifier.

iv) Be sure to repair any leaks in your home immediately.

v) Keep your windows open to allow for proper ventilation.

By following these tips, you can be sure that your curtains will stay free of mould and mildew. So be sure to keep them in mind the next time you’re cleaning your curtains.

Frequently Asked Questions

When it comes to removing mould from thermal curtains, there are a few questions that are often asked. Let’s take a look at some of the most frequently asked questions.

1. Do Thermal Curtains Cause Condensation?

Thermal curtains are a popular product for reducing the amount of condensation on windows. The curtains work by trapping heat against the window, which can cause the temperature of the window to increase. This can help to reduce the amount of condensation that forms on the window.

2. Why Do My Curtains Go Mouldy?

Mould and mildew can form on curtains and other fabrics when there is excess moisture in the air. This can be due to high humidity levels, or from condensation caused by warm air meeting cold surfaces. The mould and mildew can cause damage to the fabric, and can also be a health hazard.

3. How Do You Get Mould Out of Curtains Without Washing Them?

Mould and mildew can be difficult to remove from fabric, but a stiff-bristled brush can help make the process a little easier. The stiff bristles will help dislodge any build-up on the fabric, making it easier to clean without having to wash the curtains. But be sure to brush gently so as not to damage the fabric.

Conclusion

Mould and mildew can be a real problem in the home. But by following the steps outlined in this article, you can be sure that your curtains will stay mould and mildew free. Simply take the time to vacuum or brush them on a regular basis and be sure to store them in a dry place when you’re not using them.

In addition, if your home is prone to high levels of humidity, be sure to use a dehumidifier. And finally, be sure to repair any leaks in your home immediately. Hope this article has helped you learn how to get mould out of thermal curtains. Thanks for reading!

Leave a Reply

Your email address will not be published.